Non-Military Documents

Organization Issuing Standards

AAMI HE
Human Factors Engineering Guidelines and Preferred Practices for the Design of Medical Devices (Second Edition)

ANSI R15.05-3
Industrial Robots and Robot Systems - Reliability Acceptance Testing - Guidelines

ANSI/AIAA G-035
Human Performance Measurements

ANSI/AIAA R-013
Recommended Practice for Software Reliability

ANSI/ASA S3.18
Evaluation of Human Exposure to Whole- Body Vibration, Guide for (ASA 38) (R 1993)

ANSI/ASHRAE 55
Thermal Environmental Conditions for Human Occupancy

ANSI/ESD S5.1
REVISED - Human Body Model (HBM) Electrostatic Discharge Sensitivity Testing

ANSI/HFES 100
Human Factors Engineering of Visual Display Terminal Workstations

ANSI/IEEE 1023
Guide for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations

ANSI/IEEE 500 Guide to the Collection and Presentation of Electrical, Electronic, Sensing Component, and Mechanical Equipment Reliability Data for Nuclear-Power Generating Stations (R 1991)

ANSI/IEEE 577
Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations (R 1992)

ANSI/IEEE 762
Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity (R 1993)

ANSI/SAE AIR 4276
Survey Results: Computerization of Reliability, Maintainability & Supportability (RM&S) in Design

ANSI/SAE ARP 4032
Human Engineering Considerations in the Application of Color to Electronic Aircraft Displays

ANSI/SAE ARP 4107
Aerospace Glossary for Human Factors Engineers

ANSI/SAE J 833
Human Physical Dimensions, Recommended Practice; May 1989

ARINC 628 ITEM 12.0
Reliability

ASA S3.18
Evaluation of Human Exposure to Whole Body Vibration, Guide for (ASA 38) (R 1993)

ASA S3.34
Guide for the Measurement and Evaluation of Human Exposure to Vibration Transmitted to the Hand (ASA 67)

ASAE EP456
Test and Reliability Guidelines (R 1991)

ASHRAE 55
Thermal Environmental Conditions for Human Occupancy

BSI BS 5760: PART 0
1986 Reliability of Constructed or Manufactured Products, Systems Equipment and Components Part 0: Introductory Guide to Reliability

BSI BS 5760: PART 1
1985 Reliability of Systems, Equipments and Components Part 1: Guide to Reliability and Maintainability Programme Management

BSI BS 5760: PART 2

1994 Reliability of Systems, Equipments and Components Part 2: Guide to the Assessment of Reliability (G)

BSI BS 5760: PART 3
1982 Reliability of Systems, Equipments and Components Part 3: Guide to Reliability Practices: Examples

BSI BS 5760: PART 4
1986 Reliability of Systems, Equipments and Components Part 4: Guide to Specification Clauses Relating to the Achievement and Development of Reliability in New and Existing Items

BSI BS 5760: PART 5
1991 Reliability of Systems, Equipment and Components Part 5: Guide to Failure Modes, Effects and Criticality Analysis (FMEA and FMECA) (G)

BSI BS 5760: PART 6
1991 Reliability of Systems, Equipment and Components Part 6: Guide to Programs for Reliability Growth (IEC 1014: 1989) (G)

BSI BS 5760: PART 7
1991 Reliability of Systems, Equipment and Components Part 7: Guide to Fault Tree Analysis (G) (IEC 1025: 1990)

BSI BS 5760: PART 9
1992 Amd 1 Reliability of Systems, Equipment and Components Part 9: Guide to the Block Diagram Technique (AMD 8152) April 15, 1994 (IEC 1078: 1991) (G)

BSI BS 5760: SEC 10
1993 Reliability of Systems, Equipment and Components Part 10: Guide to Reliability Testing Section, General Requirements, Compliance Test Procedures for Steady- State Availability, Guide to Reliability Testing, Compliance Test Plans for Success Ratio (IEC 1025: 1979)

BSI BS 5760: PART 11
1994 Reliability of Systems, Equipment and Components Part 11: Collection of Reliability, Availability, Maintainability and Maintenance Support Data from the Field (IEC 300- 3-2: 1993) (G)

BSI BS 5760: PART 12
1993 Reliability of Systems, Equipment and Components Part 12: Guide to the Presentation of Reliability, Maintainability and Availability Predictions (IEC 863: 1986) (G)

BSI BS 5760: SEC 13.1
1993 Reliability of Systems, Equipment and Components Part 13: Guide to Reliability Test Conditions for Consumer Equipment Section 13.1: Conditions Providing a Low Degree of Simulation for Indoor Portable Equipment (IEC 605-3-1: 1986) (G)

BSI BS 5760: SEC 13.2
1993 Reliability of Systems, Equipment and Components Part 13: Guide to Reliability Test Conditions for Consumer Equipment Section 13.2: Conditions Providing a High Degree of Simulation for Equipment Use in Partially Weatherprotected Locations

BSI BS 5760: SEC 13.3
1993 Reliability of Systems, Equipment and Components Part 13: Guide to Reliability Test Conditions for Consumer Equipment Section 13.3: Conditions Providing a Low Degree of Simulation for Equipment for Stationary Use in Partially Weatherprotected Locations (IEC 605-3- 3: 1992) (G)

BSI BS 5760: SEC 13.4
1993 Reliability of Systems, Equipment and Components Part 13: Reliability Test Conditions for Consumer Equip. Section 13.4:Conditions Providing a Low Degree of Simulation for Equipment for Portable and Non-Stationary Use (IEC 605-3-4: 1992) (G)

BSI BS 5760: PART 14
1993 Reliability of Systems, Equipment and Components Part 14: Guide to Formal Design Review (IEC 1160: 1992) (G)

BSI BS EN 61078
1994 Amd 1 Reliability of Systems, Equipment and Components Part 9: Guide to the Block Diagram Technique (AMD 8152) April 15, 1994 (IEC 1078: 1991) (G)

BSI HANDBOOK NO.22 PART 2
1992 Reliability and Maintainability (G)

CAA CHAPTER B7-1 APP 08.83
General Reliability

CAA CHAPTER J2-1 APP#3 09.66
System Reliability

CAA CHAPTER K6-12 APP1 10.92
Systems Reliability

CECC CECC 00 801 ISSUE 1 Preliminary Guidance Document: Pi-Q Factors of CECC Approved Components for Use in Reliability Predictions (En, Fr, Ge) AMD 1 (En, Fr, Ge)

CECC CECC 00 804 ISSUE 1
Guidance Document: Interpretation of "EN 29000" - Reliability Aspects for Electronic Components (En, Fr, Ge)

CENELEC EN 61078
Analysis Techniques for Dependability - Reliability Block Diagram Method (IEC 1078 : 1991)

CENELEC ETR 039
Human Factors (HF); Human Factors Standards for Telecommunications Applications

CENELEC ETR 051
Human Factors (HF); Usability Checklist for Telephones Basic Requirements

CENELEC ETR 070
Human Factors (HF); the Multiple Index Approach (MIA) for the Evaluation of Pictograms

CENELEC ETR 095
Human Factors (HF); Guide for Usability Evaluations of Telecommunications Systems and Services

CENELEC ETR 096
Human Factors (HF); Phone Based Interfaces (PBI) Human Factors Guidelines for the Design of Minimum Phone Based User Interface to Computer Services

CENELEC ETR 113
Human Factors (HF); Results of an Evaluation Study of Pictograms for Point-to-Point Videotelephony

CENELEC HD 485
Analysis Techniques for System Reliability - Procedure for Failure Mode and Effects Analysis (FMEA)

CENELEC HD 485 S1
Analysis Techniques for System Reliability - Procedure for Failure Mode and Effects Analysis (FMEA)

CEPT T/N 45-01 E
Testing the Compliance of an Equipment with Its Reliability, Maintainability and Availability Specifications

CEPT T/SF 40 E
Human Factor Aspects of Visual Display Terminals for Telecommunication Services

CNS B8006
Glossary of Terms for Reliability (General) (Oct)(11381)

CNS C5029
General Rules for Reliability Assured Electronic Components (Jan)(4901)

CNS C5155
Data Processing Vocabulary (Part 14: Reliability, Maintenance and Availability) (Aug)(10242)

CNS C6303
Method of Test for Reliability of Household Audio Product (Oct)(12120)

CNS C6304 Method of Test for Reliability of Video Product (Oct)(12121)

CSA CAN/CSA- Q632-90
Reliability and Maintainability Management Guidelines; (Gen Instr 1)

CSA CAN/CSA- Q633-90
Reliability, Availability, and Maintainability Design Guide for Electronic Products; (Gen Instr 1)

CSA Q636-93
Guidelines and Requirements for Reliability Analysis Methods; (Gen Instr 1)

EIA JEP70
Quality and Reliability Standards

EIA RB4-A
Reliability Quantification

EIA RB9
Failure Mode and Effect Analyses

ESD S5.1
REVISED - Human Body Model (HBM) Electrostatic Discharge Sensitivity Testing

ETSI ETR 039
Human Factors (HF); Human Factors Standards for Telecommunications Applications

ETSI ETR 051
Human Factors (HF); Usability Checklist for Telephones Basic Requirements

ETSI ETR 068
Human Factors (HF); European Standardisation Situation of Telecommunications Facilities for People with Special Needs

ETSI ETR 070
Human Factors (HF); the Multiple Index Approach (MIA) for the Evaluation of Pictograms

ETSI ETR 095
Human Factors (HF); Guide for Usability Evaluations of Telecommunications Systems and Services

ETSI ETR 096
Human Factors (HF); Phone Based Interfaces (PBI) Human Factors Guidelines for the Design of Minimum Phone Based User Interface to Computer Services

ETSI ETR 113
Human Factors (HF); Results of an Evaluation Study of Pictograms for Point-to-Point Videotelephony

ETSI ETS 300 295
Human Factors (HF); Specification of Characteristics of Telephone Services Tones When Locally Generated in Terminals

ETSI PRETS 300 295
Human Factors (HF); Specification of Characteristics of Telephone Services Tones When Locally Generated inTerminals

ETSI PRETS 300 375
Human Factors (HF); Pictograms for Point- to-Point Videotelephony

EURO DEC/81/11953
Reliability Military Data Exchange guide (2nd Edition)

EURO EC/EEPSG/73/1944
Standard Format for Presentation of Reliability and Maintainability Information for Equipment Suppliers to Prime Constructors

EURO PSC/83/12418
Supply of Basic Maintainability and Reliability Data

I.E.S.
Glossary of Reliability Growth Terms

I.E.S.
Reliability, Design, Test, and Evaluation Publications

IEC 1014
Programmes for Reliability Growth First Edition

IEC 1078
Analysis Techniques for Dependability - Reliability Block Diagram Method First Edition (CENELEC EN 61078: 1993)

IEC 1123
Reliability Testing Compliance Test Plans for Success Ratio First Edition

IEC 300
Reliability and Maintainability Management Second Edition

IEC 362
Guide for the Collection of Reliability, Availability, and Maintainability Data from Field Performance of Electronic Items First Edition

IEC 605
Equipment Reliability Testing

IEC 706 PT 1
Guide on Maintainability of Equipment Part 1: Sections One, Two and Three Introduction, Requirements and Maintainability Programme First Edition

IEC 706 PT 2
Guide on Maintainability of Equipment Part 2: Section Five - Maintainability Studies During the Design Phase First Edition

IEC 706 PT 3
Guide on Maintainability of Equipment Part 3: Sections Six and Seven Verification and Collection, Analysis and Presentation of Data First Edition

IEC 706 PT 4
Guide on Maintainability of Equipment Part 4: Section 8 - Maintenance and Maintenance Support Planning First Edition

IEC 812
Analysis Techniques for System Reliability - Procedure for Failure Mode and Effects Analysis (FMEA) First Edition

IEC 863
Presentation of Reliability, Maintainability and Availability Predictions First Edition

IEEE 352
Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems (R 1994) (ANSI/IEEE)

IEEE 500
Guide to the Collection and Presentation of Electrical, Electronic, Sensing Component, and Mechanical Equipment Reliability Data for Nuclear-Power Generating Stations (R 1991) (ANSI/IEEE)

IEEE 500 P&V
Standard Reliability Data for Pumps and Drivers, Valve Actuators, and Valves

IEEE 577
Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations (R 1992) (ANSI/ IEEE)

IEEE 762
Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity (R 1993) (ANSI/IEEE)

IPC D-330 1.2.10
MIL-STD-781 (Reliability Design Qualification and Production Acceptance Tests: Exponential Distribution); Revision C - October 1977, Notice 1 - March 1981 (Design Guide)

IPC D-330 1.2.11
MIL-STD-790 (Reliability Assurance Program for Electronic Parts Specifications); Revision D - May 1986 (Design Guide)

IPC D-330 1.2.18
DOD-STD-2000-1 (Soldering Technology, High Quality/High Reliability); Revision A - March 1985 (Design Guide)

IPC D-330 1.2.19
DOD-STD-2000-2 (Part and Component Mounting for High Quality/High Reliability Soldered Electrical and Electronic Assemblies) (Design Guide)

IPC D-330 1.2.20
DOD-STD-2000-3 (Criteria for High Quality/High Reliability Soldering Technology) (Design Guide)

IPC D-330 1.3.15
MIL-S-45743 (Soldering, Manual Typed, High Reliability Electrical and Electronic Equipment); Revision E - October 1976, Int. Amendment 4 - September 1982 (Design Guide)

IPC D-330 2.3.4.1
Reliability (Design Guide)

ISO 8107
Nuclear Power Plants - Maintainability - Terminology First Edition

JIS C 5700
General Rules for Reliability Assured Electronic Components (R 1982)

JIS X 0014
Glossary of Terms Used in Information Processing (Reliability, Maintenance and Availability)

JIS Z 8500
Ergonomics - Anthropometric and Biomechanic Measurements

MOD UK DSTAN 00-25:PART 1
Human Factors for Designers of Equipment Part 1: Introduction Issue 2 (09.87); Amendment 1 Corrections

MOD UK DSTAN 00-25:PART 2
Human Factors for Designers of Equipment Part 2: Body Size Issue 1 (08.85)

MOD UK DSTAN 00-25:PART 3
Human Factors for Designers of Equipment Part 3: Body Strength and Stamina Issue 1 (04.84); Corrigendum

MOD UK DSTAN 00-25:PART 4
Human Factors for Designers of Equipment Part 4: Workplace Design Interim Issue 1 (08.91)

MOD UK DSTAN 00-25:PART 5
Human Factors for Designers of Equipment Part 5: Stresses and Hazards Interim Issue 1 (05.92)

MOD UK DSTAN 00-25:PART 6
Human Factors for Designers of Equipment Part 6: Vision and Lighting Issue 1 (08.86)

MOD UK DSTAN 00-25:PART 7
Human Factors for Designers of Equipment Part 7: Visual Displays Issue 1 (10.86)

MOD UK DSTAN 00-25:PART 8
Human Factors for Designers of Equipment Part 8: Auditory Information Interim Issue 1 (04.89)

MOD UK DSTAN 00-25:PART 9
Human Factors for Designers of Equipment Part 9: Voice Communication Interim Issue 1 (04.91)

MOD UK DSTAN 00-25:PART 10
Human Factors for Designers of Equipment Part 10: Controls Interim Issue 1 (12.92)

MOD UK DSTAN 00-25:PART 11
Human Factors for Designers of Equipment Part 11: Design for Maintainability Issue 1 (08.88)

MOD UK DSTAN 00-25:PART 12
Human Factors for Designers of Equipment Part 12: Systems Issue 1 (07.89)

MOD UK DSTAN 00-40:PART 1
Reliability and Maintainability Part 1: Management Responsibilities and Requirements for Programmes and Plans Issue 2 (07.87) (ARMP-1)

MOD UK DSTAN 00-40:PART 2
Reliability and Maintainability Part 2: General Application Guidance on the Use of Part 1 (ARMP-1) Issue 1 (06.88) (ARMP-2)

MOD UK DSTAN 00-40:PART 3
MoD Practices and Procedures for Reliability and Maintainability Part 3: Application of National R and M Documents Issue 1 (08.89) (ARMP-3)

MOD UK DSTAN 00-40:PART 4
Reliability and Maintainability Part 4: Guidance for Writing NATO R & M Requirements Documents Issue 1 (09.91) (ARMP-4)

MOD UK DSTAN 00-40:PART 5
Reliability and Maintainability Part 5: Guidance on R & M Training Issue 1 (02.89) (ARMP-5)

MOD UK DSTAN 00-40:PART 6
Reliability and Maintainability Part 6: In-Service R & M Issue 1 (12.88) (ARMP-6)

MOD UK DSTAN 00-40:PART 8
Reliability and Maintainability Part 8: Procurement of Off - The - Shelf Equipment (ARMP - 8) Issue 1 (07.92)

MOD UK DSTAN 00-41
Reliability and Maintainability MoD Guide to Practices and Procedures Issue 3 (06.93) (Supersedes All Previously Issued Separate Parts)

MOD UK DSTAN 00-43:PART 1
Reliability and Maintainability Assurance Activity Part 1: In-Service Reliability Demonstrations Issue 1 (01.93)

MOD UK DSTAN 00-44:PART 1
Reliability and Maintainability Data Collection and Classification Part 1: Maintenance Data & Defect Reporting in the Royal Navy, the Army and the Royal Air Force Issue 1 (03.93) (Supersedes Def Stan 05-59)

MOD UK DSTAN 00-44:PART 2
Reliability and Maintainability Data Collection and Classification Part 2: Data Classification and Incident Sentencing - General Issue 1 (04.94)

MOD UK DSTAN 00-5: PART 1
Design Criteria for Reliability, Maintainability and Maintenance of Land Service Materiel Part 1: General Requirements Issue 3 (02.79); Amendment 1

MOD UK DSTAN 00-5: PART 2
Design Criteria for Reliability, Maintainability and Maintenance of Land Service Materiel Part 2: Mechanical Aspects Issue 3 (02.79)

MOD UK DSTAN 00-5: PART 3
Design Criteria for Reliability, Maintainability and Maintenance of Land Service Materiel Part 3: Electrical and Electronic Aspects Issue 3 (02.79)

MOD UK DSTAN 00-5: PART 4
Design Criteria for Reliability, Maintainability and Maintenance of Land Service Materiel Part 4: Optical Aspects Issue 1 (02.79)

MOD UK DSTAN 05-48
Reliability of a Series System Issue 1 (03.78)

MOD UK DSTAN 05-63
Guidelines for Classifying Incidents for Reliability Estimation of Tracked and Wheeled Vehicles Issue 1 (10.84)

MOD UK NES 1017
Requirements for Maintainability Demonstrations of Naval Systems Issue 3 (01.93)

NATO ARMP-1 AMD 0
NATO Requirements for Reliability and Maintainability

NATO ARMP-1 ED 2
NATO Requirements for Reliability and Maintainability

NATO ARMP-2 AMD 0
General Application Guidance on the Use of ARMP-1

NATO ARMP-2 ED 2
General Application Guidance on the Use of ARMP-1

NATO ARMP-3 AMD 0
Application of National R and M Documents

NATO ARMP-4 ED 1 AMD 0
Guidance for Writing NATO R & M Requirements Documents

NATO ARMP-5 AMD 0
Guidance on Reliability and Maintainability Training

NATO ARMP-6 AMD 0
In-Service R & M

NATO ARMP-8 ED 1 AMD 0
Reliability & Maintainability in the Procurement of Off-The- Shelf Equipment

NATO STANAG 4174 ED 1 AMD 1
Allied Reliability and Maintainability Publications

NFPA FPEH SEC 4-5
Reliability (SFPE Handbook of Fire Protection Engineering, 1st Ed.)

RAC CRTA-FMECA
Failure Mode, Effects, and Criticality Analysis (FMECA)

RAC EEMD-1
Electronic Equipment Maintainability Data

RAC EERD-2
Electronic Equipment Reliability Data

RAC MDR-21
Microcircuit Device Reliability Trend Analysis

RAC MFAT-2
Characterization and Failure Analysis Techniques a Procedural Guide

RAC NONOP-1
Nonoperating Reliability Databook

RAC NPRD
Nonelectronic Parts Reliability Data

RAC NPS
Mechanical Applications in Reliability Engineering

RAC NPS-1
Analysis Techniques for Mechanical Reliability

RAC PRIM
Primer for DOD Reliability, Maintainability, Safety, and Logistics Standards

RAC RDSC-1
Reliability Sourcebook

RAC RMST-93
Reliability & Maintainability Software Tools

RAC SOAR-2
Practical Statistical Analysis for the Reliability Engineer

RAC SOAR-3
IC Quality Grades: Impact on System Reliability and Life Cycle Cost

RAC SOAR-4
Confidence Bounds for System Reliability

RAC SOAR-5
Surface Mount Technology: A Reliability Review

RAC SOAR-6
ESD Control in the Manufacturing Environment

RAC SOAR-8
Process Action Team Handbook

RAC TOOLKIT
Reliability Engineer's Toolkit

SAA AS 2529
Collection of Reliability, Availability and Maintainability Data for Electronics and Similar Engineering Use (R 1994)

SAA AS 2530
Presentation of Reliability Data on Electronic and Similar Components (R 1994)

SAA AS 3930
Reliability and Maintainability - Introductory Guide (in Professional Package 46)

SAA AS 3960
Guide to Reliability and Maintainability Program Management

SAE AE-9
Automotive Electronics Reliability Handbook; February 1987

SAE AIR 4276
Survey Results: Computerization of Reliability, Maintainability & Supportability (RM&S) in Design

SAE ARD 50010
Recommended RMS Terms and Parameters

SAE ARD 50046
RMS Information Sourcebook

SAE ARP 4107
Aerospace Glossary for Human Factors Engineers

SAE ARP 4153
Human Interface Criteria for Collision

SAE ARP 4155
Human Interface Design Methodology for

SAE ARP 813A
Maintainability Recommendations for Aircraft Wheels and Brakes (R 1988)

SAE J 1213/2
Glossary of Reliability Terminology Associated with Automotive Electronics, Information Report; October 1988

SAE J 1460
Human Mechanical Response Characteristics, Information Report; March 1985

SAE J 833
Human Physical Dimensions, Recommended

SAE J 885
Human Tolerance to Impact Conditions as Related to Motor Vehicle Design, Information Report; July 1986

SEMI E10
Guideline for Definition and Measurement of Equipment Reliability, Availability, and Maintainability (RAM)

Menu for Standards?

Main Menu?